Got a chipped or cracked windshield? Don’t let that small damage turn into a big problem! With PatscoPatch, you can easily repair your windshield in just a few minutes. Here’s a simple step-by-step guide to show you how.
First, make sure you have all the items from your PatscoPatch windshield repair kit on hand. The kit includes everything you need to get started—resin, applicator, curing strips, and instructions.
Use a glass cleaner to thoroughly clean the damaged area and remove any dust or debris. This ensures that the resin bonds effectively, making the repair strong and long-lasting.
Take the applicator from your PatscoPatch kit and place it directly over the damaged spot. Apply the resin by pressing down firmly on the applicator to inject it into the crack or chip. Make sure the resin fills the entire area to prevent the crack from spreading.
Once the resin has been applied, place a curing strip over the area. The curing strip helps the resin set and creates a strong bond with the glass, restoring the integrity of your windshield.
Allow the resin to cure by leaving your car in direct sunlight for about 10 to 15 minutes. The sunlight will harden the resin, ensuring a clear and durable finish.
After the resin has cured, gently remove the curing strip and use a razor blade to scrape off any excess resin. Be careful to avoid scratching the windshield.
Finally, inspect the repair to ensure the chip or crack is fully sealed. Your windshield should look almost like new, with minimal visibility of the original damage.
In just a few simple steps, you’ve repaired your windshield and saved yourself a costly replacement.
PatscoPatch makes it easy to fix minor damage and keep your car safe.
Ready to fix your windshield? Grab a PatscoPatch kit today and see just how quick and easy it is to get the job done.
Protect your windshield and eliminate the hazard
with the PATSCO Patch.
Patent NO.: US 10,946,624
